Fiber Optic Cable Shop
ABOUT USCUSTOMER SERVICECONTACT US
toll free: 800-777-6269
Search


Technical Information Center



[ Home > Fiber Optic Switches > DISCONTINUED- Fiber Optic Switch, SignaMAX, 10/100, Multimode, 6 copper & 1 fiber port (SC/ST) ]

Click to enlarge

DISCONTINUED- Fiber Optic Switch, SignaMAX, 10/100, Multimode, 6 copper & 1 fiber port (SC/ST)

These compact fiber access switches provide the right port interfaces you need for fiber-extended networks. The FS-7111 series of switches allows cost-effective fiber extension to small workgroups and Programmable Logic Controller (PLC) clusters. These switches support enterprise-level network extension to outlying buildings in a campus environment, and can also extend process control networks over fiber to production or control machinery equipped with PLCs at Fast Ethernet speeds. These switches, to allow administrative and production networks to coexist on the same fiber link, transparently pass tagged VLAN and Quality of Service (QoS) packets used to separate and prioritize sub-networks.

KEY FEATURES
· Provides 7 Ports for 10/100 and 1 Port for 100FX
· True Non-Blocking Architecture
· Full Wire-Speed Forwarding Rate
· Store-and-Forward Mechanism
· Back Pressure and IEEE802.3x Compliant Flow Control
· Front Panel Port Status LEDs
· Auto-MDIX on All Twisted Pair Ports
· Desktop or Wall-Mountable
· Five-Year Performance Warranty

SPECIFICATIONS

·PORTS
7 – Fixed 10/100BaseT/TX Auto-MDIX ports, RJ-45 connectors; (IEEE 802.3u Type 10BaseT & 100BaseTX)
1 – Fixed 100BaseFX port, SC or ST multimode (IEEE 802.3u Type 100BaseFX)

-MAXIMUM DISTANCE:
2,000 meters with 62.5/125 micron or 50/125 micron multimode fiber cabling

·LED STATUS INDICATORS
Per Switch: Power
Per Port: Link/Activity

·PERFORMANCE
Throughput: 148,810 pps at 100 Mbps, 14,800 pps at 10 Mbps (64-byte packets)
Switch Fabric Speed: 1.6 Gbps.
Address Table Size: 2,048 entries

·FIBER INTERFACE DATA
Type: LED
Wavelength: 1300nm nominal (1270nm maximum, 1380nm minimum)
Maximum Output Power: - 14.0 dBm
Minimum Output Power: - 20.0 dBm
Sensitivity: -33.0 dBm
Maximum Input Power: - 8.0 dBm
Link Power Budget: 13.0 dB
Maximum distance: 2,000 meters with 62.5/125 or 50/125 micron fiber cabling

·PHYSICAL CHARACTERISTICS
Dimensions: 10.0"W x 5.3"D x 1.4"H (254 mm x 135 mm x 35 mm)
Weight: 3.5 lbs. (1.6 kg.)

·ENVIRONMENT
Operating:
Temperature: 32°F to 122°F (0°C to 50°C)
Relative Humidity: 10 to 90%, non-condensing
Altitude: 3,048 meters (10,000 feet)
Non-Operating/Storage:
Temperature: -13°F to 158°F (-25°C to 70°C)
Relative Humidity: 10 to 90%, non-condensing

·ELECTRICAL CHARACTERISTICS
Maximum Wattage: 15 Watts
Current: 4.0 Amps maximum
Voltage: 100 to 240 Volts AC
Frequency: 50 to 60 Hz.
Heat Dissipation: 85 BTU per hour

·EMISSIONS
FCC part 15 Class A, CE Mark Class A, VCCI Class A

·APPLICABLE STANDARDS
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
IEEE 802.3x Flow Control

·SAFETY
UL 1950

·WARRANTY
Five years, including power supply

Desktop or wall mounting


Item #: FS-7111-MM2-XX

Fiber Connector: 


PLEASE CALL FOR LENGTHS AND CONFIGURATIONS NOT SHOWN



Copyright © Fiber Optic Cable Shop. All World Rights Reserved.