WDM Media Converter 10/100/1000Mbps (Gigabit), Singlemode, 20kmThe ME-3930-WDM20-SC (single fiber (WDM), singlemode) media converter transfers data over a single singlemode fiber at 1000Mbps (at 1310nm and 1550nm) and connects to copper Ethernet at 10, 100 or 1000 Mbps while auto-sensing the correct speed. Maximum distance for this unit is 20km (12.4 miles). Distance on the Ethernet side is 100 meters (328 feet) using Cat-5 or better (unshielded or shielded twisted pair) copper cable. The fiber connections are SC and the copper Ethernet connection is RJ-45.
This media converter uses wave division multiplexing (WDM) which transmits and receives over one singlemode fiber optic strand (simplex fiber). It does this by using a different wavelength for each transmit and receive (1310nm and 1550nm). This is accomplished by using a matched pair of media converters, one of which transmits at 1310nm and receives at 1550nm, while the other transmits at 1550nm and receives at 1310nm.
Please note— This price is for two ME-3930-WDM20-SC media converters in a matched set. The price shown represents the price for both units together.
Power: 5vdc at 2.5 watts. Power supply included operates at 110-260vac at 50-60Hz.
Operating temperature: 0° to 55°C (32° to 130°F)
Operating humidity: 5% to 80% (non-condensing)
Fiber connections: Singlemode: SC.
Copper connection: RJ-45 (standard Ethernet)
Fiber cabling: Singlemode: duplex, 8-9/125.
Maximum distance: Singlemode: 20km (12.4mi)
Data rate copper (Ethernet): 10Mbps, 100Mbps, or 1000Mbps (automatically selected)
Data rate fiber: 1000Mbps (gigabit)
Unit "A": Transmit 1310nm, Receive 1550nm
Unit "B": Transmit 1550nm, Receive 1310nm
* Fiber link connection / fiber link activity
* Ethernet link connection / Ethernet link activity
* Full duplex / half duplex
* Power on
* Ethernet transfer rate 1000Mbps or 100Mbps / 10Mbps
* Fiber signal detected
Standards: IEEE802.3, IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX/LX
Flow control: IEEE802.3x flow control for full-duplex mode, back-pressure flow control for half-duplex mode.
Compliance: FCC Part 15, CE, RoHS
PLEASE CALL FOR LENGTHS AND CONFIGURATIONS NOT SHOWN
Copyright © Fiber Optic Cable Shop. All World Rights Reserved.